Technical Support
and TechNotes

This section of the site contains a selection of technical information and application notes offering suggestions about the use of our units, and solutions to popular technical support requests.

Looking for OIder Products?

Try the archive for old manuals and last
release software, as well as older
AudioCore and other software...




Need to Return Something?


Got a problem that needs looking at (non-medical only please), having an option fitted, or just sending back stock for a service?

Returning units is simple:

IMPORTANT: Please include a brief note of why the unit is being returned - even if you have been in contact about the return beforehand, things will happen faster if there's a reminder in the box!

Pack the unit in its original box if possible, and send back to the address below, clearly marked for SERVICE.

XTA Electronics,
The Design House,
Vale Business Park,
Worcester Road,
Stourport on Severn,
Worcestershire,
England.
DY13 9BZ


You don't need a returns number - this will be issued when the unit is booked into our system, and you will receive confirmation of its safe arrival, along with the returns number, and any applicable charges.

YOU WILL NEED TO APPROVE THE CHARGES (if out of guarantee) BEFORE
ANY WORK IS UNDERTAKEN.

Any questions, just contact Gareth - and quote your returns number if it's about something you've sent back. Thanks.



Note that manuals and datasheets are in .pdf Adobe Acrobat format. Download the latest reader from their site by clicking on the logo.


 

General
Beginner's Guide to EQ & Crossovers
Presentation explaining the basic principles of EQ...

Beginner's Guide to Dynamics
Presentation explaining the basics of compression, gating etc...

Startup Control Codes
All codes for diagnostic and utility functions on all units...

Cloning a Unit
Using AudioCore to download settings from one unit and upload to another (of the same type)...

Remote & Interfaces
Remote Interface Guide

Which interface to choose for your application, how to use and order it...

Warning for NetStumbler Users
If you use this software and one of our Walkabout kits, please read this important warning!

Moxa N-Port Ethernet to Serial Converter

How to configure this converter to work with AudioCore..

Moxa Configuration file
Text file containing settings : see above document for details...

RS485 Converter
Manual for our recommended KK Systems K2ADE RS232 to RS485 serial converter...

RJ45 - RS485 Connections
Pinouts of the RJ45 comms connector and adapting it to a D-type...

4 Series
GPI Interface
Copy of the application notes included with the GPI interface option...

Simple Remote Protocol
Basic serial control messages for memory recall, gain & delay adjustments...

RS485 Converter
Modify your KK Systems K2ADE to run at 115k...

DP224/6
Copy Presets
How to copy presets from one unit (of the same type) to another, using a PCMCIA card...

Copy & Reloading Software
How to copy software from one unit and reboot another...

Mono Summing
Internal hardware modification to sum the inputs in the input stage...

Retrofitting Output Transformers
Internal hardware modification to fit output transformers...

GPI Interface
Copy of the application notes included with the GPI interface option...



DP324
Ducker Application
How to set up a SiDD to perform as a ducker...

Insert Wiring
How to conect a SiDD to the inserts of a mixing desk...

 

 

 
       


Site-wide Copyright XTA Electronics Limited 2007. Comments about this site? Contact info(a)xta.co.uk
Registered UK Address:XTA Electronics Ltd, The Design House, Vale Business Park, Worcester Road, Stourport on Severn, Worcestershire, DY13 9BZ
Registered in England:2735913